Two Speed

1

9,000 to 12,000 FT-LBS
13,000 to 16,000 FT-LBS
20,000 to 30,000 FT-LBS
30,000 to 70,000 FT-LBS
80,000 to 150,000 FT-LBS

TWO SPEED 9,000 TO 12,000 FT-LBS DRIVE UNITS

Digga's two speed screw pile anchor drives can be used for a wider range of applications up to 12,000 ft-lbs.

Developed in conjunction with leading screw anchor / helical pile installers around the world, Digga brings you the only true anchor drives available - Designed and manufactured in-house specifically for the rigors of the application. This means that your host machine can operate in its most efficient horse power range to minimize wear and tear, optimizing performance to ensure a higher return on your investment.

Features

It's like owning 2 drives in 1 - Install both small and larger piles
Improve productivity by installing smaller piers with more efficiency
Minimize fuel consumption when running at lower RPM
Change speeds with just the flick of a switch
Fitted with an Eaton VIS motor for consistent pile installation
3yr Gearbox & 2yr Motor Warranty
No additional maintenance costs

Choose From 2 pressure Series

Standard pressure series (ADT) - Machines with 3500 PSI
Low Pressure series (ALT) - Machines with 3000 PSI

Specs

Description	12ADT	9ALT	12ALT
Torque (Ft-LBS)	12,028	10,310	12,705
Max Pressure Do Not Exceed	3500 PSI @ 29 GPM	3000 PSI @ 29 GPM	3000 PSI @ 29 GPM
Max Flow Do Not Exceed	53 GPM @ 1950 PSI	53 GPM @ 1950 PSI	53 GPM @ 1950 PSI
Max Horse Power	60	60	60
Pressure Relief Valve	Included	Included	Included
Energy Control Valve	Included	Included	Included
Output Shaft	2.5’’ Hex	2.5’’ Hex	2.5’’ Hex

Ouput Speed& Torque

12ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	7	11	1,500	5,155	3,402
12	11	16	1,700	5,842	3,856
16	14	22	1,900	6,530	4,310
20	18	27	2,100	7,217	4,763
24	21	32	2,300	7,904	5,217
28	25	38	2,500	8,592	5,670
32	29	43	2,700	9,279	6,124
36	32	49	2,900	9,966	6,578
40	36	54	3,100	10,654	7,031
44	39	59	3,300	11,341	7,485
48	43	65	3,500	12,028	7,939

9ALT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	7	11	1,000	3,437	2,268
12	11	16	1,200	4,124	2,722
16	14	22	1,400	4,811	3,175
20	18	27	1,600	5,499	3,629
24	21	32	1,800	6,186	4,083
28	25	38	2,000	6,873	4,536
32	29	43	2,200	7,561	4,990
36	32	49	2,400	8,248	5,444
			2,600	8,935	5,897
			2,800	9,623	6,351
			3,000	10,310	6,805

12ALT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	6	9	1,000	4,235	2,795
12	9	13	1,200	5,082	3,354
16	12	18	1,400	5,929	3,913
20	14	22	1,600	6,776	4,472
24	17	26	1,800	7,623	5,031
28	20	31	2,000	8,470	5,590
32	23	35	2,200	9,317	6,149
36	26	39	2,400	10,164	6,708
40	29	44	2,600	11,011	7,267
44	32	48	2,800	11,858	7,826
48	35	53	3,000	12,705	8,385

Output speed and torque specifications are THEORETICAL. Speed and torque are dependent on the overall system efficiencies associated with the prime movers hydraulic system.

Optional Extras

Ryno Cradle Hitch
Drive Linkages
Excavator Mounts/hitch
Torque Pin
Telescopic Piling Extention

TWO SPEED - 13,000 TO 16,000 FT-LBS DRIVE UNITS

Digga's two speed screw pile anchor drives can be used for a wider range of applications up to 16,000 ft-lbs.

Features

It's like owning 2 drives in 1 - Install both small and larger piles
Improve productivity by installing smaller piers with more efficiency
Minimize fuel consumption when running at lower RPM
Change speeds with just the flick of a switch
Fitted with an Eaton VIS motor for consistent pile installation
3yr Gearbox & 2yr Motor Warranty
No additional maintenance costs

Choose From 2 pressure Series

Standard pressure series (ADT) - Machines with 3500 PSI
Low Pressure series (ALT) - Machines with 3000 PSI

Specs

Description	13ADT	16ADT	13ALT	16ALT
Torque (Ft-LBS)	13,347	16,448	14,098	17,739
Max Pressure Do Not Exceed	3500 PSI @ 33 GPM	3500 PSI @ 33 GPM	3000 PSI @ 33 GPM	3000 PSI @ 33 GPM
Max Flow Do Not Exceed	53 GPM @ 2200 PSI	53 GPM @ 2200 PSI	53 GPM @ 2200 PSI	53 GPM @ 2200 PSI
Max Horse Power	67	67	67	67
Pressure Relief Valve	Included	Included	Included	Included
Energy Control Valve	Included	Included	Included	Included
Output Shaft	3’’ Hex	3’’ Hex	3’’ Hex	3’’ Hex

Ouput Speed & Torque

13ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	6	10	1,500	5720	3,775
12	10	15	1,700	6,483	4,279
16	13	19	1,900	7,246	4,782
20	16	24	2,100	8,008	5,286
24	19	29	2,300	8,771	5,789
28	23	34	2,500	9,534	6,292
32	26	39	2,700	10,297	6,796
36	29	44	2,900	11,059	7,299
40	32	49	3,100	11,822	7,802
44	35	54	3,300	12,585	8,306
48	39	58	3,500	13,347	8,809

16ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	5	8	1,500	7,049	4,652
12	8	12	1,700	7,989	5,273
16	10	16	1,900	8,929	5,893
20	13	20	2,100	9,869	6,513
24	16	24	2,300	10,809	7,134
28	18	28	2,500	11,749	7,754
32	21	32	2,700	12,689	8,374
36	23	36	2,900	13,629	8,995
40	26	40	3,100	14,568	9,615
44	29	43	3,300	15,508	10,235
48	31	47	3,500	16,448	10,856

13ALT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	5	8	1,000	4,699	3,102
12	8	12	1,200	5,639	3,722
16	10	16	1,400	6,579	4,342
20	13	20	1,600	7,519	4,963
24	16	24	1,800	8,459	5,583
28	18	28	2,000	9,399	6,203
32	21	32	2,200	10,339	6,824
36	23	36	2,400	11,279	7,444
40	26	40	2,600	12,219	8,064
44	29	43	2,800	13,159	8,685
48	31	47	3,000	14,098	9,305

16ALT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	4	6	1,000	5,913	3,903
12	6	9	1,200	7,095	4,683
16	8	13	1,400	8,278	5,464
20	10	16	1,600	9,461	6,244
24	12	19	1,800	10,643	7,025
28	15	22	2,000	11,826	7,805
32	17	25	2,200	13,008	8,586
36	19	28	2,400	14,191	9,366
40	21	31	2,600	15,347	10,147
44	23	35	2,800	16,556	10,927
48	25	38	3,000	17,739	11,708

Output speed and torque specifications are THEORETICAL. Speed and torque are dependent on the overall system efficiencies associated with the prime movers hydraulic system.

Optional Extras

Ryno Cradle Hitch
Drive Linkages
Excavator Mounts/hitch
Torque Pin
Telescopic Piling Extention

TWO SPEED - 20,000 TO 30,000 FT-LBS DRIVE UNITS

Digga's two speed screw pile anchor drives can be used for a wider range of applications up to 30,000 ft-lbs.

Features

It's like owning 2 drives in 1 - Install both small and larger piles
Improve productivity by installing smaller piers with more efficiency
Minimize fuel consumption when running at lower RPM
Change speeds with just the flick of a switch
Fitted with an Eaton VIS motor for consistent pile installation
3yr Gearbox & 2yr Motor Warranty
No additional maintenance costs

Choose From 2 pressure Series

Standard pressure series (ADT) - Machines with 3500 PSI
Low Pressure series (ALT) - Machines with 3000 PSI

Specs

Description	20ADT	25ADT	30ADT	20ALT	25ALT
Torque (Ft-LBS)	20,309	25,027	31,489	21,452	26,991
Max Pressure Do Not Exceed	3500 PSI @ 39 GPM	3500 PSI @ 39 GPM	3500 PSI @ 39 GPM	3000 PSI @ 39 GPM	3000 PSI @ 39 GPM
Max Flow Do Not Exceed	53 GPM @ 2600 PSI	53 GPM @ 2600 PSI	53 GPM @ 2600 PSI	53 GPM @ 2600 PSI	53 GPM @ 2600 PSI
Max Horse Power	80	80	80	80	80
Pressure Relief Valve	Included	Included	Included	Included	Included
Energy Control Valve	Included	Included	Included	Included	Included
Output Shaft	100 MM Square	100 MM Square	100 MM Square	100 MM Square	100 MM Square

Ouput Speed & Torque

20ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	4	6	1,500	8,704	5,745
12	6	10	1,700	9,864	6,510
16	8	13	1,900	11,025	7,276
20	11	16	2,100	12,185	8,042
24	13	19	2,300	13,346	8,808
28	15	22	2,500	14,506	9,574
32	17	26	2,700	15,667	10,340
36	19	29	2,900	16,827	11,106
40	21	32	3,100	17,988	11,872
44	23	35	3,300	19,148	12,638
48	25	38	3,500	20,309	13,404

25ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	3	5	1,500	10,726	7,079
12	5	8	1,700	12,156	8,023
16	7	10	1,900	13,586	8,967
20	9	13	2,100	15,016	9,911
24	10	16	2,300	16,446	10,855
28	12	18	2,500	17,876	11,798
32	14	21	2,700	19,307	12,742
36	15	23	2,900	20,737	13,686
40	17	26	3,100	22,167	14,630
44	19	29	3,300	23,597	15,574
48	21	31	3,500	25,027	16,518
30ADT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	3	4	1,500	13,495	8,907
12	4	6	1,700	15,295	10,094
16	5	8	1,900	17,094	11,282
20	7	10	2,100	18,893	12,470
24	8	12	2,300	20,693	13,657
28	10	14	2,500	22,492	14,845
32	11	17	2,700	24,292	16,032
36	12	19	2,900	26,091	17,220
40	14	21	3,100	27,890	18,408
44	15	23	3,300	29,690	19,595
48	16	25	3,500	31,489	20,783

20ALT
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	3	5	1,000	7,151	4,719
12	5	8	1,200	8,581	5,663
16	7	10	1,400	10,011	6,607
20	9	13	1,600	11,441	7,551
24	10	16	1,800	12,871	8,495
28	12	18	2,000	14,301	9,439
32	14	21	2,200	15,731	10,383
36	15	23	2,400	17,161	11,327
40	17	26	2,600	18,592	12,270
44	19	29	2,800	20,022	13,214
48	21	31	3,000	21,452	14,158

Output speed and torque specifications are THEORETICAL. Speed and torque are dependent on the overall system efficiencies associated with the prime movers hydraulic system.

Optional Extras

Ryno Cradle Hitch
Drive Linkages
Excavator Mounts/hitch
Torque Pin
Telescopic Piling Extention

SUPA DRIVES
TWO SPEED - 30,000 TO 70,000 FT-LBS DRIVE UNITS

The Supa Drive range provides you with the most versatile selection of supreme planetary drives boasting greater power and speed. Designed for screw piling and ground anchor installation up to 70,000 ft-lbs.

Digga’s innovative compact design and industry leading innovations make this range of drive units the industry’s first choice for anchored applications. With world leading technology as standard inclusions such as the Energy Control Valve (ECV) which prevents rapid decompression of oil caused by pile kick-back, and a built-in Pressure Relief Valve (PRV) to give you peace of mind that your investment is protected.

Features

2 Speed drive system
Compact high torque Digga manufactured gearbox
The highest volumetrically efficient motor available - Maintain consistent & efficient pile installation
Extreme duty shaft locking system
No complex hoses, valving or filtration
Built-in Pressure Relief Valve standard
Energy Control Relief Valve
1yr Gearbox & 1yr Motor Warranty

Dimensions

Overall Length: from 50.9"
Diameter: from 23.6"

Specs

Description	SD45	SD50	SD70	SD80	SD95
Torque (Ft-LBS)	32,895	38,569	50,465	60,828	67,675
Max Pressure Do Not Exceed	3500 PSI @ 100 GPM	3500 PSI @ 100 GPM	3500 PSI @ 100 GPM	3500 PSI @ 100 GPM	3500 PSI @ 100 GPM
Max Flow Do Not Exceed	100 GPM @ 3500 PSI	100 GPM @ 3500 PSI	100 GPM @ 3500 PSI	100 GPM @ 3500 PSI	100 GPM @ 3500 PSI
Max Horse Power	201	201	201	201	201
Pressure Relief Valve	Included	Included	Included	Included	Included
Energy Control Valve	Included	Included	Included	Included	Included
Output Shaft	100 MM Square	100 MM Square	100 MM Square	100 MM Square	100 MM Square

Ouput Speed & Torque

SD45
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	3	5	700	6,578	3,289
12	4	8	800	7,518	3,759
16	5	10	900	8,458	4,229
20	7	13	1,000	9,398	4,699
24	8	16	1,100	10,338	5,169
28	9	18	1,200	11,277	5,639
32	10	21	1,300	12,217	6,109
36	12	23	1,400	13,157	6,578
40	13	26	1,500	14,097	7,048
44	14	29	1,600	15,036	7,518
48	16	31	1,700	15,976	7,988
52	17	34	1,800	16,916	8,458
56	18	37	1,900	17,856	8,928
60	21	42	2,000	18,796	9,398
64	21	42	2100	19,735	9,868
68	22	44	2200	20,675	10,338
72	23	47	2300	21,615	10,807
76	25	50	2400	22,555	11,277
80	26	52	2500	23,494	11,747
84	27	55	2600	24,434	12,217
88	29	57	2700	25,374	12,687
92	30	60	2800	26,314	13,157
96	31	63	2900	27,254	13,627
100	33	65	3000	28,193	14,097
			3100	29,133	14,567
			3200	30,073	15,036
			3300	31,013	15,506
			3500	32,892	16,446

SD50
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	2	4	700	7,714	3,857
12	3	7	800	8,816	4,408
16	4	9	900	9,918	4,959
20	6	11	1,000	11,020	5,510
24	7	13	1,100	12,122	6,061
28	8	16	1,200	13,224	6,612
32	9	18	1,300	14,326	7,163
36	10	20	1,400	15,428	7,714
40	11	22	1,500	16,530	8,265
44	12	24	1,600	17,632	8,816
48	13	27	1,700	18,734	9,367
52	14	29	1,800	19,836	9,918
56	16	31	1,900	20,938	10,469
60	17	33	2,000	22,040	11,020
64	18	36	2100	23,142	11,571
68	19	38	2200	24,224	12,122
72	20	40	2300	25,346	12,673
76	21	42	2400	26,448	13,224
80	22	45	2500	27,550	13,775
84	23	47	2600	28,652	14,326
88	24	49	2700	29,754	14,877
92	26	51	2800	30,856	15,428
96	27	53	2900	31,958	15,979
100	28	56	3000	33,060	16,530
			3100	34,162	17,081
			3200	35,264	17,632
			3300	36,366	18,183
			3500	38,569	19,285

SD70
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	2	3	700	10,093	5,046
12	3	5	800	11,535	5,767
16	3	7	900	12,977	6,488
20	4	9	1,000	14,418	7,209
24	5	10	1,100	15,860	7,930
28	6	12	1,200	17,302	8,651
32	7	14	1,300	18,744	9,372
36	8	15	1,400	20,186	10,093
40	9	17	1,500	21,628	10,814
44	9	19	1,600	23,070	11,535
48	10	20	1,700	24,511	12,256
52	11	22	1,800	25,953	12,977
56	12	24	1,900	27,395	13,698
60	13	26	2,000	28,837	14,418
64	14	27	2100	30,279	15,139
68	14	29	2200	31,721	15,860
72	15	31	2300	33,163	16,581
76	16	32	2400	34,604	17,302
80	17	34	2500	36,046	18,023
84	18	36	2600	37,488	18,744
88	19	37	2700	38,930	19,465
92	20	39	2800	40,372	20,186
96	20	41	2900	41,814	20,907
100	21	43	3000	43,225	21,628
			3100	44,697	22,349
			3200	46,139	23,070
			3300	47,581	23,791
			3500	50,465	25,232

SD80
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	1	3	700	12,166	6,083
12	2	4	800	13,904	6,952
16	3	6	900	15,641	7,821
20	4	7	1,000	17,379	8,690
24	4	8	1,100	19,117	9,559
28	5	10	1,200	20,855	10,428
32	6	11	1,300	22,593	11,297
36	6	13	1,400	24,331	12,166
40	7	14	1,500	26,069	13,035
44	8	16	1,600	27,807	13,904
48	8	17	1,700	29,545	14,773
52	9	18	1,800	31,283	15,641
56	10	20	1,900	33,021	16,510
60	11	21	2,000	34,759	17,379
64	11	23	2100	36,497	18,248
68	12	24	2200	38,235	19,117
72	13	25	2300	39,973	19,986
76	13	27	2400	41,711	20,855
80	14	28	2500	43,449	21,724
84	15	30	2600	45,187	22,593
88	16	31	2700	46,924	23,462
92	16	32	2800	48,662	24,331
96	17	34	2900	50,400	25,200
100	18	39	3000	52,138	26,069
			3100	53,876	26,938
			3200	55,614	27,807
			3300	57,352	28,676
			3500	60,828	30,414

SD95
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	1	3	700	13,535	6,768
12	2	4	800	15,469	7,734
16	3	5	900	17,402	8,701
20	3	6	1,000	19,336	9,668
24	4	8	1,100	21,269	10,635
28	4	9	1,200	23,203	11,601
32	5	10	1,300	25,136	12,568
36	6	11	1,400	27,070	13,535
40	6	13	1,500	29,004	14,502
44	7	14	1,600	30,937	15,469
48	8	15	1,700	32,871	16,435
52	8	16	1,800	34,804	17,402
56	9	18	1,900	36,738	18,369
60	10	19	2,000	38,672	19,336
64	10	20	2100	40,605	20,303
68	11	22	2200	42,539	21,269
72	11	23	2300	44,472	22,236
76	12	24	2400	46,406	23,203
80	13	25	2500	48,339	24,170
84	13	27	2600	50,273	25,136
88	14	28	2700	52,207	26,103
92	15	29	2800	54,140	27,070
96	15	30	2900	56,074	28,037
100	16	32	3000	58,007	29,004
			3100	59,941	29,970
			3200	61,874	30,937
			3300	63,808	31,904
			3500	67,675	33,838

Output speed and torque specifications are THEORETICAL. Speed and torque are dependent on the overall system efficiencies associated with the prime movers hydraulic system.

Optional Extras

Ryno Cradle Hitch
Drive Linkages
Excavator Mounts/hitch
Torque Pin
Telescopic Piling Extention

MEGA DRIVES
TWO SPEED - 80,000 TO 150,000 FT-LBS DRIVE UNITS

The Digga Mega Anchor Drive range is not for the faint hearted - Ideally suited to the screw anchor and foundation drilling contractor. It is the ultimate in mega high torque performance up to 150,000ft-lbs. Digga drives utilize volumetrically superior and highly efficient Radial Piston motors to deliver constant and effective performance day in, day out - week after week.

Features

2 Speed drive system
Compact high torque Digga manufactured gearbox
The highest volumetrically efficient motor available - Maintain consistent & efficient pile installation
Extreme duty shaft locking system
No complex hoses, valving or filtration
Built-in Pressure Relief Valve standard
Energy Control Relief Valve
1yr Gearbox & 1yr Motor Warranty

Specifications

Overall Length: from 54.6"
Diameter: from 24"

Specs

Description	MD110	MD160	MD190
Torque (Ft-LBS)	86,301	127,762	149,815
Max Pressure Do Not Exceed	3500 PSI @ 66 GPM	3500 PSI @ 66 GPM	3500 PSI @ 66 GPM
Max Flow Do Not Exceed	66 GPM @ 3500 PSI	66 GPM @ 3500 PSI	66 GPM @ 3500 PSI
Max Horse Power	127	127	127
Pressure Relief Valve	Included	Included	Included
Energy Control Valve	Included	Included	Included
Output Shaft	130 MM Square	130 MM Square	130 MM Square

Ouput Speed & Torque

MD110
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	1	2	700	16,975	8,487
12	2	3	800	19,399	9,700
16	2	4	900	21,824	10,912
20	3	5	1,000	24,249	12,125
24	3	6	1,100	26,674	13,337
28	4	7	1,200	29,099	14,550
32	4	8	1,300	31,524	15,762
36	5	9	1,400	33,949	16,975
40	5	10	1,500	36,374	18,187
44	6	11	1,600	38,799	19,399
48	6	12	1,700	41,224	20,612
52	7	13	1,800	43,649	21,824
56	7	14	1,900	46,074	23,037
60	8	15	2,000	48,499	24,249
64	8	16	2100	50,924	25,462
68	9	17	2200	53,348	26,674
72	9	18	2300	55,773	27,887
76	10	19	2400	58,198	29,099
80	10	20	2500	60,623	30,312
84	11	21	2600	63,048	31,524
88	11	22	2700	65,473	32,737
92	12	23	2800	67,898	33,949
96	12	24	2900	70,323	35,162
100	13	25	3000	72,748	36,374
			3100	75,173	37,586
			3200	77,598	38,799
			3300	80,023	40,011
			3500	84,873	42,436

MD160
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	1	1	700	25,130	12,565
12	1	2	800	28,720	14,360
16	1	3	900	32,310	16,155
20	2	3	1,000	35,889	17,950
24	2	4	1,100	39,489	19,745
28	2	5	1,200	43,079	21,540
32	3	5	1,300	46,669	23,335
36	3	6	1,400	50,259	25,130
40	3	7	1,500	53,849	26,925
44	4	8	1,600	57,439	28,720
48	4	8	1,700	61,029	30,515
52	4	9	1,800	64,619	32,310
56	5	10	1,900	68,209	34,105
60	5	10	2,000	71,799	35,899
64	5	11	2100	75,389	37,694
68	6	12	2200	78,979	39,489
72	6	12	2300	82,569	41,284
76	6	13	2400	86,159	43,079
80	7	14	2500	89,749	44,874
84	7	14	2600	93,339	46,669
88	8	15	2700	96,929	48,464
92	8	15	2800	100,519	50,259
96	8	16	2900	104,108	52,054
100	9	17	3000	107,698	53,849
			3100	111,288	55,644
			3200	114,878	57,439
			3300	118,468	59,234
			3500	125,648	62,824

MD190
Output Speed			Output Torque
GPM	High Torque Low Speed	Low Torque High Speed	PSI	High Torque Low Speed	Low Torque High Speed
8	1	1	700	29,467	14,734
12	1	2	800	33,677	16,838
16	1	2	900	37,886	18,943
20	1	3	1,000	42,069	21,048
24	2	3	1,100	46,305	23,153
28	2	4	1,200	50,515	25,257
32	2	5	1,300	54,725	27,362
36	3	5	1,400	58,934	29,467
40	3	6	1,500	63,144	31,572
44	3	6	1,600	67,353	33,677
48	3	7	1,700	71,563	35,781
52	4	8	1,800	75,772	37,886
56	4	8	1,900	79,982	39,991
60	4	9	2,000	84,192	42,096
64	5	9	2100	88,401	44,201
68	5	10	2200	92,611	46,305
72	5	10	2300	96,820	48,410
76	6	11	2400	101,030	50,515
80	6	12	2500	105,240	52,620
84	6	12	2600	109,449	54,725
88	6	13	2700	113,659	56,829
92	7	13	2800	117,868	58,934
96	7	14	2900	122,078	61,039
100	7	15	3000	126,287	63,144
			3100	130,497	65,249
			3200	134,707	67,353
			3300	138,916	69,458
			3500	147,335	73,668

Output speed and torque specifications are THEORETICAL. Speed and torque are dependent on the overall system efficiencies associated with the prime movers hydraulic system.

Optional Extras

Ryno Cradle Hitch
Drive Linkages
Excavator Mounts/hitch
Torque Pin
Telescopic Piling Extention

Two Speed

1

TWO SPEED 9,000 TO 12,000 FT-LBS DRIVE UNITS

Features

Specs

Description

12ADT

9ALT

Ouput Speed& Torque

12ADT

9ALT

12ALT

Optional Extras

TWO SPEED - 13,000 TO 16,000 FT-LBS DRIVE UNITS

Features

Specs

Description

13ADT

16ADT

13ALT

16ALT

Ouput Speed & Torque

13ADT

16ADT

13ALT

16ALT

Optional Extras

TWO SPEED - 20,000 TO 30,000 FT-LBS DRIVE UNITS

Features

Specs

Description

20ADT

25ADT

30ADT

20ALT

25ALT

Ouput Speed & Torque

20ADT

25ADT

30ADT

20ALT

Optional Extras

SUPA DRIVESTWO SPEED - 30,000 TO 70,000 FT-LBS DRIVE UNITS

Features

Dimensions

Specs

Description

SD45

SD50

SD70

SD80

SD95

Ouput Speed & Torque

SD45

SD50

SD70

SD80

SD95

Optional Extras

MEGA DRIVESTWO SPEED - 80,000 TO 150,000 FT-LBS DRIVE UNITS

Features

Specifications

Specs

Description

MD110

MD160

MD190

Ouput Speed & Torque

MD110

MD160

MD190

Optional Extras

SUPA DRIVES
TWO SPEED - 30,000 TO 70,000 FT-LBS DRIVE UNITS

MEGA DRIVES
TWO SPEED - 80,000 TO 150,000 FT-LBS DRIVE UNITS